For professional 3D printing we offer special filaments:
1. SMP (Shape Memory Polymer) is special TPU as a filament for 3D printing by means of FDM/FFM/FLM which features offers Post-Print Customization with a shape memory effect.
Ø 1,75mm; Weight: 300gr. (Tolerance of +/- 0.1mm)
Ø 2,85mm; Weight: 750gr. (Tolerance of +/- 0.05mm)
Technical Data Sheet: TDS
Printing Guideline (Ultimaker): Guideline
Usage example: Example
Safety Data Sheet: SDS
Typical Printer settings:
Nozzle diameter: 0.4 ～ 1.0 mm
Nozzle temperature: 200～210 degrees Celsius
Platform Temperature: 0～45 degrees Celsius (Never over 55 degrees Celsius)
Modeling speed: 30 ～ 60 mm / s
*SMP changes the shape at temperatures above 55 degrees celsius. Therefore, you have to check that the temperature of model is below 55 degree Celsius. The printed product should be removed from the bed once the bed temperature is below 30 degrees Celsius.
2. FABRIAL™ -R is an ISO10993-5 (in vitro cytotoxicity) and ISO10993-10 (irritation and skin sensitization testing) certified TPE for 3D printing by means of FDM/FFM/FLM.
Ø 1,75mm; Weight: 500gr. (Tolerance of +/- 0.05mm)
Ø 2,85mm; Weight: 750gr. (Tolerance of +/- 0.05mm)
Technical Data Sheet: TDS
Safety Data Sheet: SDS
Typical printer settings:
Nozzle diameter: 0.6 ～ 0.8 mm
Nozzle Temperature:
1st Layer 159 degrees Celsius
After 2nd Layer 169 degrees Celsius
Platform temperature: 105 degrees Celsius.
Modeling speed: 10 ～ 35 mm / s
*From experience, 0.6 ～ 0.8 mm nozzle diameter is better for modeling by FABRIAL™-R.
*Please pay attention the temperature of nozzle. If FABRIAL™-R is processed with to high temperatures, it will be carbonized in a nozzle of 3D printer. When this happens, the nozzle needs to be replaced.
* Distance between feeder and nozzle should not exceed 10cm.
Typical Printer settings:
Nozzle diameter: 0.5 mm
Nozzle temperature: 200～270 degrees Celsius (recommended 230 degrees Celsius)
Platform Temperature: 0～50 degrees Celsius
Modeling speed: 40 mm / s
We offer PVDF (Polyvinylidene fluoride) filament in white for the professional 3D printing market.
Ø 1,75mm und Ø 2,85mm (Tolerance +/- 0,05mm); Weight: 500gr.
Extrusion temperature.: 240°C-250°C; Bed temperature.: 100°C-120°C
Printing speed: 50 mm/sec – Layer height: 0,25mm
Printing speed:30 mm/sec. – Layer height: 0,14mm
USP Class VI
Important: Please use an enclosed 3D printer when printing with PVDF!
Guide to the safe handling of fluoropolymer resins
We offer PEEK (Polyetheretherketone) filament for the professional 3D printing market
Ø 1,75 mm (Tolerance ± 0,05 mm); Weight: 250 gr
